Size:300w
Submersible aquarium heaters are one of the most popular way to keep your tank at a steady and controlled temperature, Fish water heater will be your best choice!

Features:
1. IP68 100% Waterproof, Fully Submersible
2. Protection: The Case will protect your heater, ABS material
3. Accurate temperature control from 68°F to 94°F (20°C ~ 34°C)
4. Suitable for both fresh and saltwater aquariums.

Specification:
Submersible Aquarium Heaters
Length - 14 inch, for 40~80 Gallons, 300 Watts.

Important Caution:
1.Do not power on the heater before you put it in the water, as there is the chance to be get burns.
2.If you want to move the heater or change the aquarium water, you need to power off the heater first and wait 15 minutes until the temperature drops to normal temperature.
3.the water level should be higher than the hard rubber head of the heater.
4.The power cable cannot be repaired or replaced, the entire heater need to be replaced when it gets damaged.
5.This product is not available to children or those without independent working abilities.

• Aquarium Heater Specification: 300 watts, 110 L/H flow water, Volt 110~120v, Freq: 50/60Hz for US/CA.
• Fish Tank Heater Attention: Please take the heater into water before turning on , DO NOT power on until the heater is completely submerged in the water.
• Tank Heater Capacity: 300 watts Used Tank up to 80 Gallons, the size need more than 17 inch. Temperature adjustable of between 68F - 94F.
• Aquarium Technology: Mechanical heat technology built with a safety shut-off, Integrated fish guard to protect fish and invertebrates.
• Note: Please Make sure heater is de-energized and cool before take out of water. It is recommended to cool in the water for 15 minutes . 12 months warranty period.